There are three ways to lower your fuel bills. First, you can insulate your home so heat loss is minimized. Second, you can use energy efficient appliances such as refrigerators and freezers, dishwashers, washing machines, and energy efficient lighting. The third way is perhaps the most important. Make your heating system more efficient. If your central heating boiler is inefficient, the level of combustion is low and it produces less heat. Inefficient combustion leads to higher harmful emissions, mainly in the form of unburned particles.
The obvious solution is to replace with a more efficient central heating boiler. This could cost you thousands. There is a simpler way, do it yourself and inexpensive.
Attach the correct magnet to your boiler’s fuel feed tube and combustion will instantly become cleaner, your house will get hotter and your water will get hotter for the same setting.
The magnet conditions the gas or oil prior to combustion, allowing it to better mix with oxygen in the air. This produces more heat for the same amount of fuel. Since the burning is cleaner, the emission level will be significantly reduced.
Inefficient boilers have soot buildup due to poor combustion. When a magnet is used, soot deposits stop immediately and the combustion chamber gradually decarbonizes. This means your boiler will last longer and require less maintenance.
Magnets have been used since the 1940s as an energy saving device. The US Air Force successfully used magnetic fields to improve the performance of its Mustang aircraft. The magnetic field produced longer range and better performance from poor quality fuels. It was so successful that the Royal Air Force used it on their Spitfire and Hurricane aircraft.
The device, however, was very heavy and cumbersome because to achieve the high magnetic fields they had to use electromagnets. Today, with the development of supermagnets like neodymium, stronger magnetic fields can be generated from matchbox-sized magnets.
The magnets work in any combustion chamber that uses oil or gas. It is very effective when attached to cars, especially older carbureted cars where MPG is low. In 1992, The Warren Springs Laboratories, the UK government’s own DTI vehicle testing department, were commissioned to carry out extensive testing on the benefits of magnetic fuel conditioning technology and were very surprised with the results. . His detailed 16-page report confirmed increased power, better fuel economy and a reduction in harmful emissions. When the magnets were removed, the benefits were reversed.
The correct magnet costs only a few pounds. A new central heating boiler costs much more. A neodymium magnet maintains its magnetic properties for 100 years. It is maintenance free and if you move house simply remove it and connect it to the pipe that goes to the central heating boiler in your new home.
Currently, the amount of carbon dioxide released into the atmosphere remains unacceptable. The best option for homeowners is reusable energy, but the installation cost is high and it takes at least ten years to pay back the investment. Most homeowners cannot afford the conversion. They continue to use oil or gas. Therefore, it is very important that they make the best possible use and that is achieving close to 100% combustion of gas and oil fossil fuels. Attaching a magnet will help accomplish this.
Copyright 2006 Dr Phil Hariram
