Even with the best type of storage devices available in the digital world, one could face data loss issue at any time. Data loss can be a big problem as it can lead to various types of organizational and work issues. However, if the data was written to the device’s memory, it can be recovered using various data recovery tools and techniques. Data recovery tools or software can help to recover the data in its most authentic form; however, the success of the recovery process also largely depends on the type of damage and the structure of the system.
Reasons for data loss
There can be various reasons for unwanted data loss such as:
- Deletion of folders and files.
- storage failure
- The logical system of the device is damaged
- If the file system is formatted by mistake, etc.
Of various types of data storage devices, RAID is a very high capacity but fragile storage device. Data loss on RAID is one of the major issues these days as it is not always the most reliable option for home and organizational users. For the perfect data recovery, one should take the help of the best raid recovery services.
What is raid data recovery?
RAID, or Redundant Array of Independent Disks, is a type of storage device that can store a large amount of data on a daily basis. If the RAID system fails, huge amounts of data can be lost and only RAID data recovery software is used for that. The recovery process is a combination of manual and automated procedures. These techniques are used in software and hardware based RAID architectures. Data recovery can be performed from any RAID level (0, 1, 2, 3, etc.). The process can be complex, starting with learning the RAID level and then moving on to rebuilding the storage arrays to their initial configuration.
The reasons for data loss from a RAID system are:
- Bad and faulty drivers
- Defective hard drives
- Data Overwrite
- Drives being reformatted
- corrupt software
Why seek professional help?
With sudden data loss on a RAID system, the first thing to consider is to consult a data recovery company immediately. As mentioned before, RAID is a complex system and it is better to leave the recovery process to professionals only, otherwise you may end up with permanent data loss.
This professional who does the recovery of the Raid follows an established pattern to avoid further damage. The initial step involves making sure all drives are working perfectly by cleaning them and then repairing them. After this, all drives are cloned so that no other data is written to them. Now these clones are used in the recovery process and the originals are not tampered with. After this the cloned drives are described, this brings all the scattered data to a single location. After this, the general data recovery process can be started.
