Air powered vacuum trucks (also known as wet/dry vacuum trucks) are typically designed with a high airflow capacity of 5,000 to 6,000 cfm with a 27 to 28 inch vacuum pump with two or three lobes. . They also have the same components as standard vacuum trucks, such as the baghouse with filter bags; the cyclone separator; and the tank. The following is a list of important component options for this extremely versatile piece of equipment that will greatly enhance your performance.
- hydraulic pen – This component is very useful for trench or sewer applications, as well as when the job location is over a fence or wall. Hydraulic booms allow operators to have additional tubes that can be lowered directly into the mud or waste site. Operators can be located in a safer and cleaner location instead of manually controlling the hose.
- advanced pump system – There are different pumping systems, such as sludge or vane models, that can be installed on these special trucks. The slurry version is used to pump liquid materials or slurries from a tank. Vane version can be added to expel materials from the body. It can also be used as an auxiliary pump to suck up liquid material and is also known as body pressurization or auxiliary vane design.
- download options – There are at least two unloading options for air trucks: pneumatic unloading and high dump systems. A pneumatic unloading system uses a component that allows equipment to unload material directly into a silo, storage bins, or hoppers, as well as into another tank or truck body. Another option for unloading material is the high dump system; the tank is raised to discharge the material into a container or taken directly to the disposal site.
- Removable Divider – A removable separator can be added and is very useful, especially in circumstances that require the discharge of material in bags, barrels or open containers even before they enter the tank. Therefore, this component is very effective, especially when handling hazardous materials. Allows simultaneous suction and continuous discharge of material.
- rail wheels – The rail wheels can be installed on air motors so that they can be used on railways and operate on railway tracks. Rail wheels are typically mounted at the front and rear of the truck, and rear seats and platforms can be installed to allow operators to use the system on rail tracks. To drive the air motors back and forth on the rail, a creeper system is installed on the unit.
- sound suppression system – One of the biggest problems with many vacuum trucks during operation is the high volume of noise. A sound suppression system can be installed on the vehicle, reducing the sound levels of the equipment during operation.
Pneumatic vacuum trucks are an exceptional tool that offer great potential for many companies. They work efficiently and are very cost effective for any vacuum extraction task. If business owners have enough knowledge about this equipment, including its components, capabilities, and operational requirements, such a vehicle can be a good investment. These units can be customized to meet the specific business needs of each company. Knowledge about air powered vacuum truck can enable a business owner to effectively increase productivity and profitability!
